Advantages
A major advantage of our precision oil spray system over others' is the use of a continuous, ultra-fine, non-mist delivery of lubricant. Our systems can spray minute quantities of lubricant for a selected duration of time, resulting in cost-savings by:-
-
reducing product contamination
-
decreasing lubricant consumption
-
eliminating under- or over-lubrication
Eliminates Contamination
Our precision oil spray nozzles lubricate exactly where required with an accurate amount of lubricant to reduce product contamination. Unlike traditional oil mist systems, our spray systems eliminate environmental contamination typically caused by “stray mist.”
Continuous, Consistent Spray
ORSCO systems can dispense up to 0.03 cu. cm of lubricant continuously for a period exceeding four minutes with no change in spray pattern, even after another drop of lubricant is injected.
Dramatically Increases Life Expectancy of Lubricated Devices
Percentage elongation (see chart, below) is maintained at a consistent low level, even after 3,000 hours of use. The result is five to ten times longer life expectancy of the lubricated devices.
Up to 90% Lubricant Reduction
If you calculate the actual amount of lubricant that is needed for a particular application, the majority of manual and auto-lubrication systems over-lubricate. Because our systems lubricate continuously with an ultra-fine, non-mist spray, only the exact amount of oil required to lubricate is used.
Eliminates the Too Much, Too Little Factor
Our systems lubricates more effectively than traditional cycle lubrication systems or manual lubrication. With our system you are always at the optimum lubricating range. | 